DIY Custom Monogram Wooden Placemats
Don't forget to stop by and Like my Facebook Page and Follow me on Twitter!
A quick weekend project! Ready to spruce up your dinner parties? Make your own custom placemats. You just need a few supplies.
Materials:
{2} 1"x6"x6' boards
Pocket hole jig
{24} 1" pocket screws
Wood Glue
Felt Squares
E6000 Epoxy
Stamp or stencil
Paint for letter
Finishing wax
Final size: 6 placemats at 11" x 16"
I cut my boards down to size, 16", for a total of 12 {two boards per placemat}
Next I lined up the boards two by two and drilled pocket holes into opposing sides.
Before screwing the boards together, I put some wood glue in between the boards.
Now I screwed the boards together with my pocket hole screws.
I wanted some cushion for the back of the placemats so I bought some felt squares. They cost a whopping $.25 or so.
I used the Epoxy to attach the squares to the backs
I stacked them up and weighed them down with a heavy board until the glue dried.
Next I sanded down the tops and sides
I printed out a 'W' in a font I liked and traced it onto the boards. A stencil or stamp could be used and would be easier.
I painted in the letter on all the boards
Ready for their wax coat. I used Minwax Paste Finishing Wax
And they're ready! Now... if I can just decide on a kitchen table design to build..... Check out how to make the Spoon and Fork Artwork on the wall.
I wanted the placemats to have a natural, clean finish. Hopefully, one day, I'll build a table and the two together will look fantastic! :)
Thanks for stopping by!
Check out who I've linked up with this week by going to my Linky Party Page!
A quick weekend project! Ready to spruce up your dinner parties? Make your own custom placemats. You just need a few supplies.
Materials:
{2} 1"x6"x6' boards
Pocket hole jig
{24} 1" pocket screws
Wood Glue
Felt Squares
E6000 Epoxy
Stamp or stencil
Paint for letter
Finishing wax
Final size: 6 placemats at 11" x 16"
I cut my boards down to size, 16", for a total of 12 {two boards per placemat}
Next I lined up the boards two by two and drilled pocket holes into opposing sides.
Before screwing the boards together, I put some wood glue in between the boards.
Now I screwed the boards together with my pocket hole screws.
I wanted some cushion for the back of the placemats so I bought some felt squares. They cost a whopping $.25 or so.
I used the Epoxy to attach the squares to the backs
I stacked them up and weighed them down with a heavy board until the glue dried.
Next I sanded down the tops and sides
I painted in the letter on all the boards
Ready for their wax coat. I used Minwax Paste Finishing Wax
And they're ready! Now... if I can just decide on a kitchen table design to build..... Check out how to make the Spoon and Fork Artwork on the wall.
I wanted the placemats to have a natural, clean finish. Hopefully, one day, I'll build a table and the two together will look fantastic! :)
Thanks for stopping by!
![photo 7ce22a63-74a3-4dab-a0ca-1fc832cb3312_zps0b858cf7.jpg](http://i1244.photobucket.com/albums/gg566/DIYVintageChic/7ce22a63-74a3-4dab-a0ca-1fc832cb3312_zps0b858cf7.jpg)
Check out who I've linked up with this week by going to my Linky Party Page!
***While I'm thrilled to share my step-by-step directions, the good and the bad, these are intended for your personal use. I'm always happy to hear and see what my bloggers have been working on. BUT a lot of work goes into these creations and while I have no issues sharing so you are able to create the work for your precious homes please understand that selling an exact duplication of my designs is highly frowned upon. :( Please always be considerate of another artists work. Thank you!***
Comments
Post a Comment
Thanks for stopping by DIY Vintage Chic! I appreciate your time and comments. If you have any direct comments please let me know. Feel free to comment, use my contact page or Facebook. See ya soon!